underfloor heating foil mats are ideal for use in any room including bathrooms and wet areas. The heat mats can be cut and turned to achieve the required floor coverage and multiple mats can be joined together to cover large areas. When fitting underfloor heating a suitable insulation should always be used, (especially over concrete sub floors). The insulation will not only increase the response rate but also help maintain the high efficiency of our underfloor heating systems.
Electric underfloor heating systems under laminate and wood floors are designed for use in all rooms. This underfloor heating is suitable for use under wood and laminate flooring and covers 1sqm. At 150w/sqm the heating system can be used as a Primary Heat source, (no radiators required) or just for floor warming. In high heat loss areas you may wish to consider our 200w/sqm underfloor heating heat film kits. All our under wood and laminate heating is easy to fit, tough, durable and backed up with a full 15 year manufactures Warranty.
Electric Heating System.
• Operating voltage: 230-240V: 50Hz. • Pre spaced Heating Cable. • Dual core easy fit technology. • Ultra thin & durable heating element, (just under 2mm). • Super insulated Teflon coated sheathing. • Fully earthed. • Easy and quick to lay. • Tough fixing / fiber tape. • Free next working day delivery will all orders. • Full fitting instructions and free technical help line.
Underfloor Heating Technical Specification:
• Operating Voltage 230/240V 50Hz • Output Rating 150w/sqm. • Double insulated, fully sheathed and earthed. • Cable width 1.8mm • 3m long cold / connection tail.
Multiple mats can be used in conjunction with each other for any sized area however if the loading exceeds 16amps usually over (18sqm @ 200w) the thermostat will require a contactor/relay.
Specification
Underfloor Heating Technical Specification:
Operating Voltage 230/240V 50Hz
Output Rating 150w/sqm.
Double insulated, fully sheathed and earthed.
Cable width 1.8mm
3m long cold / connection tail.
Installation
Your final floor build up should consist of the following layers in the graphic to your left, the insulation is a crucial part of the installation this is to insulate the heating and burry your connection tales into the insulation to maintain a level floor.
Step 1
Test your heating mats with a multi meter and make sure the reading is within 5% either way of the reading stated on the box. If this isn't the case please stop and contact Underfloor Heating World for advice. Write these readings down on the back of your warranty cards, this will help determine any errors in installation.
Step 2
Clean and prime your sub floor ready for installation to begin making sure the floor is stable and level.
Step 3
Lay your Impact plus insulation making sure that the floor is level ready for the heat film to be installed over.
Step 4
Lay your underfloor heating foil heat mats directly onto the Impact plus thermal insulation, if we worked out a plan for you please simply lay your heating mats as illustrated, for the best coverage.
Step 5
Once you have laid the underfloor heating foil heat element, score your impact plus thermal insulation with a Stanley knife and embed the connection tales leading back to your thermostat into the grooves, this is to maintain a level floor and avoid pimples in your floor covering.
Step 6
Once your happy that you have achieved a level floor. Use the silver tape provided tape over the exposed wires completing the installation of your heating system.
Step 7
Re test your heating to make sure no damage was done during installation, making sure that the reading is within 5% of the reading given on the box. Then simply lay your chosen floor covering.
Step 8
Wire up your underfloor heating to the thermostat as shown to your left.
Delivery
All orders placed before 1pm will be packed and dispatched same day on a fully trackable delivery service.
All standard UK delivery addresses are dispatched on a priority next working day delivery service.
All remote locations are and off shore UK addresses are typically dispatched on a 48 hour working day service.
All international (Non UK orders will be dispatched on an international priority service. Depending upon the country and your address within the country, delivery is normally between 2 – 5 working days.
Please Note,
All standard UK deliverys are Free of charge but for some remote locations and all offshore addresses a delivery surcharge will be applied. We keep all delivery cost to a minimum, so please feel free to email of call us if you would like to confirm the delivery cost for your preferred address. sales@underfloorheatingworld.co.uk 0044 (0)1803 316060
All our delivery services are fully trackable and will be delivered by ourselves or a reputable currier such as FedEx. All orders are treated with urgency and we can provide estimated times for delivery if needed. We are not however unable to guarantee a specific delivery time or day as drivers get lost, vans break down, ports get blocked and air traffic controllers go on strike!
Thermostats
Manual Thermostat
White manual thermostat, perfect for customers who simply want to keep things simple. Fitted with a simple turn dial temperature control and on / off switch to regulate your underfloor heating system. Supplied with floor probe and fitting instructions.
Available In
D600 Digital Thermostat
D600 digital thermostats are a great entry level thermostat for use with all our underfloor heating systems. The thermostat is fully programmable or can simply be use in manual mode. Supplied with both air and floor sensors, full instructions, this unit is also available in white, silver and black colours.
Available In
T700 Touch Screen Thermostat
The T700 white touch screen thermostat is a very competent touch screen, user friendly, fully programmable thermostat. Supplied with both air and floor sensors, full instructions this thermostat is easy to use with all underfloor heating systems. Once installed they will add a stylish modern touch to any room with the added sophistication of the touch screen capabilities.
Available In
CT1000 Colour Touch Screen Thermostat
The CT1000 colour touch screen thermostats is the class leading electric underfloor heating thermostat. With a full colour 4.3 inch touch screen, variable power output, multi-functional programming options, this thermostat has a very intuitive layout making it super easy to use. It can be set to fully automate your heating or can be used in manual, party, comfort or economy modes. With both air and floor sensors the CT1000 will add a great addition to any room and is available in Glacier white, titanium silver and gloss black.
Available In
Customers who bought this item were also interested in....